Home Order Contact
ModemTools Web Store
More like this:  
16f876  
16f877  
Access  
Cisco  
Com1  
Communication  
Control  
Ds5000  
Equipment  
Gpib  
Hardware  
Hobbies  
Internet  
Intranet  
Mcs51  
Modem  
Network  
Networking  
Port  
Remote  
Robot  
Rs232  
Serial  
Server  
Servers  
Telnet  
Terminal  
Test  
Tester  
Uart  
Upicc  
     
  Search:
 





IPCOMServer 3.0

by TIGME.COM

Telnet from your Network to your custom Hardware attached to computers COM port

 

 

IPCOMServer is a cheap and easy solution to control RS-232 devices without the use of expensive router products like a Cisco® 2511 Terminal server. The IPCOMServer acts as a Telnet server, connecting the user directly to a chosen COM port. IPCOMServer can be connected to by either using a Telnet program or a custom written Telnet Client. A Telnet program will provide the user with a text interface to interrogate the attached RS-232 device. The reason why IPCOMServer was developed was to enable a user to control custom built electronic equipment, or to access remote control test equipment like, TTC Fireberd 4000® or Protocol Analyzers etc.

IPCOMServer acts as a virtual connection between a TCP/IP port or socket and a personal computers Serial/COM port. When a Telnet program or client connects to IPCOMServer, it will be connected directly to the serial port specified in the Setup of IPCOMServer. Strings of data or commands that are generated at the Client will be transported across the TCP/IP network to the Host. At the host the incoming commands are relayed to the serial port. The device attached to the host will react on the commands by sending replies back to the host, which are then relayed back the client. The replies can be used to display either text form or to update a graphical user interface (GUI). See the application notes for more information.

Download Free Trial

 

 

Copyright © 2005-2007 Pingram Software